Videopath SW-44 (SW44) Multi-Dish Switch with Power Inserter and Adapter - DISCONTINUED

Name: Videopath SW-44 (SW44) Multi-Dish Switch with Power Inserter and Adapter - DISCONTINUED
Brand: VIDEOPATH
SKU: SW44-VideoPath-Multi-Switch-44
Price: 50.16 USD
Availability: OutOfStock
Rating: 4.86 (7 reviews)

RECEIVERS | DISHES | BUNDLES | ACCESSORIES | SUPPORT

Vista general

BRAND:

VIDEOPATH

PART #:

SW44

WARRANTY:

12 MESES

Estado de existencias:

No está disponible

AVAILABILITY:

DISCONTINUED

Product Code:

SW44-VideoPath-Multi-Switch-44

Detalles

Specifications

Reseñas 7

Videopath SW-44 (SW44) Multi-Dish Switch with Power Inserter and Adapter

The legacy SW44 switch is used to expand two legacy dual LNBF's to four outputs to allow for additional receivers. The SW44 multiswitch combines signal from Bell TV's 2 satellites at 91?W & 82?W (orbital positions) and provides output for up to 4 tuners.

Bell and Dish Network approved switch. Complete SW44 Switch Assembly includes: SW44 Switch, Power Inserter and Power Supply and installation instructions. Brand new in box, 12 month warranty.

The AC/DC power supply (a) connects to the in-line power inserter (b). The main switch (c) can be connected anywhere in the distribution system and receives its power from the power inserter via one of its 4 outputs.

The 2 outputs from each LNBF of the elliptical antenna (or from each LNBF of each antenna) MUST be connected to the switch (4 inputs in total, in order to provide 1 to 4 outputs).

Connections should be as follows:

Nimiq 1 goes into 1A & 1B.
Nimiq 2 goes into 2A & 2B.
Power inserter goes into port 1 of the switch.
Receivers connect to the Receiver port of the power inserter or ports 2, 3 & 4 directly on the switch.

If you are looking to expand beyond 4 receivers, you can use 2 SW44 Switches and 4 BGI High Frequency Splitters.

Más Información
TIPO DE PRODUCTO	TELEVISIÓN SATELITAL
MARCA	VIDEOPATH
PARTE #	SW44
RED	BELL TV, DISH NETWORK
UPC	0753960003412
TIPO DE ACCESORIO	SWITCH

Product Questions

Can I buy the power inserter without anything else?

The power inserter is not available for purchase on its own, only as a part of this kit.

I am trying to help a older couple with their Bell set up. Not sure what they require. They currently have 2 PVR Bell receivers with a direct cable going to each PVR receiver from the dish.. The dish has 2 LNB on it. They want to add a 3rd NON PVR rec.

The easiest path to achieve this would be replacing the two legacy LNBs on the dish with a "DPP Quad" LNB. This LNB will have 4 complete outs - you would then run one cable to each receiver location, and any dual tuners would need a DPP seperator.

I have 4 recivers and want to add 2 more, my sw44 is full,how can I do it to add the 2 and want products do I need?

We have and expansion kit for this. Click here to see.